Your browser is out of date.
You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.
Metal fabrication operations face ongoing pressure to improve efficiency while maintaining surface quality on finished parts. Industries from automotive to aerospace require bending and forming solutions that protect pre-finished materials while delivering dimensional consistency. Traditional steel dies create witness marks on polished stainless steel, brushed aluminum, and painted surfaces - defects that require costly secondary finishing operations.
Polyurethane Products Corp. manufactures high-performance thermoset elastomers and engineered solutions for the metal fabrication industry. For over 45 years, our facility has produced specialized components that solve complex forming challenges while protecting sensitive material surfaces.
This guide examines how urethane die tooling functions in metal fabrication environments, the performance advantages over conventional steel dies, and the specific product categories we offer for radius forming, press brake operations, and stamping applications.
Die-Thane represents Polyurethane Products Corp.'s trade name for tooling-grade urethane formulated to withstand metal forming demands. The company manufactures three primary categories: radius tooling featuring the patented SMART PAD® System for universal radius bending without bottom die changes, press brake solutions including V-dies, V-pads, and die film compatible with Amada, Trumpf, and American systems, and urethane springs that outperform steel where corrosion, vibration, or magnetism create operational challenges.
Steel dies excel in high-volume production, requiring maximum rigidity, but create problems when surface quality determines part acceptability. Every contact point between steel tooling and polished metal risks scratching or marking.
Urethane eliminates witness marks through its fundamental material properties. The durometer rating - measured on Shore A or Shore D scales - determines hardness level. Softer grades conform to workpiece contours while harder grades substitute for steel dies in applications where full steel strength isn't necessary. The material changes shape during forming, reducing springback by approximately 60% compared to conventional tooling. Metal stretches more evenly across the bend radius, which reduces split risk while improving dimensional consistency.
Polyurethane Products Corp. organizes its urethane die tooling into distinct categories designed to address specific metal fabrication challenges. Each product line solves particular forming requirements while maintaining the surface protection and performance advantages inherent to urethane tooling.
Polyurethane Products Corp. manufactures specialized radius inserts engineered to create consistent, large-radius bends without the 'multi-break' defects common to steel tooling. These inserts deliver smooth, continuous radial profiles on cosmetic parts.
Our radius tooling line includes two standardized geometries:
Both feature molded holes to reduce tonnage requirements, stress relief design for extended service life, and compatibility with standard steel channel holders. Lengths extend up to 48 inches with mountable American, European, and Trumpf tangs.
Molded-tang polyurethane forming pads feature an integrated tang design for direct press-brake mounting without separate holders, while metric pads match international equipment standards for global manufacturing operations.
Polyurethane Products Corp. manufactures specialized radius inserts engineered to create consistent, large-radius bends without the 'multi-break' defects common to steel tooling. These inserts deliver smooth, continuous radial profiles on cosmetic parts.
Soft urethane pads create a forming method distinct from air bending or bottom bending. Under load, the material flows into cavities while forcing the workpiece to conform to the punch shape. This produces results similar to bottom-bent or coined parts with minimal tool wear, particularly effective for delicate or coated materials where surface integrity cannot be compromised.
Hard urethane dies resist deformation while maintaining controlled flexibility. These substitute for traditional metal dies in specific bending applications by holding a defined shape under pressure. The film creates a non-marring barrier between die and workpiece during precision bending operations, preventing scratches on cosmetic parts while extending die life by reducing wear on underlying steel tooling.
Implementing Die-Thane tooling directly addresses the cost and quality bottlenecks associated with traditional metal forming. By switching from rigid steel to a dynamic elastomer, fabrication shops achieve immediate improvements in throughput and part quality:
The elastomer material prevents marring and scratches on pre-painted, polished, or stainless steel surfaces, eliminating secondary finishing steps.
Tooling configurations reduce material springback by up to 60% compared to conventional steel dies, improving dimensional consistency.
A single, versatile urethane block often replaces multiple custom steel die openings, lowering overall tooling investments.
High-performance elastomer compounds maintain strict dimensional stability over extended production runs.
Press brakes are used to fabricate many parts and components used to house, contain, or enclose equipment and wiring. They are also used to make smaller panels, channels, and strips with specific angles, curves, and other features. Some common examples include:
Suitable for pre-polished 304 or 316 stainless steel; mar-free bending; sharp 90º bends and limitless radius bends.
Pre-painted or pre-polished aluminum or stainless steel when used with a Smart Pad® Urethane Radius Pad.
Pre-polished 316 stainless steel elements on building façades for low-maintenance and corrosion protection.
A custom radius punch can bend sheet metal up to ¼ in. thick, with only four or five hits to achieve perfect arc shapes, various radii, and no blend lines.
Polyurethane Products Corp. has manufactured high-performance urethane die tooling for metal fabrication operations since 1978. The company's ISO 9001:2015 certification demonstrates a commitment to quality systems and continuous improvement.
Whether you need radius tooling for large radius bends, press brake solutions for mar-free forming, or urethane springs for stamping operations, the technical team helps identify the right products for your specific challenges. Request a quote to discuss your metal forming needs, or contact the team for technical assistance with tool selection and implementation.
You have questions, we have answers. Contact us today. Our skilled customer service specialists can help you make the right choice in polyurethane applications.
