Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

Molded Tang

Molded Tang Press Brake Forming Pads

Our Molded Tang Die Pads are available in 3 designs: American, European & Trumpf Press Brakes. These Tang forming pads are available in 48" lengths, and in different hardnesses.

Have a Question?
Contact Us

PODTs for Radius V-Bends

  • These Pads have a molded tang to fit AMERICAN or AMADA (EUROPEAN) or TRUMPF style Press Brakes.
  • Available in 48" lengths, with a flat top surface of 3" or 4" width
  • Designed for sharp or radius V-bends and for bump-forming any radius with a punch width of 50% of the pad width penetrating the pad
  • Punch length must be equal to or longer than the pad length so as to avoid the punch ends cutting
PRESS BRAKE STYLEAMERICAN STYLEAMADA STYLETRUMPF STYLE
3”W x 2”HMT32AMT32EMT32T
4”W x 2”H MT42AMT42EMT42T
molded tang die pad
tang molded pads process

PUDTs for Radius U-Bends

These Pads have a molded U-shaped groove on top surface, for one hit U-forming of various outside radii.

  • These Pads have a molded tang to fit AMERICAN or AMADA (EUROPEAN) or TRUMPF style Press Brakes.
  • Available in 48" lengths, with a flat top surface of 3" width.
  • Punch length must be equal to or longer than the pad length so as to avoid the punch ends cutting into the pad.
PRESS BRAKE STYLEPART O.S. RADIUS 0.25"PART O.S. RADIUS 0.38"PART O.S. RADIUS 0.50"PART O.S. RADIUS 0.75"
AmericanMTUA-25RMTUA-38RMTUA-50RMTUA-75R
AmadaMTUE-25RMTUE-38RMTUE-50RMTUE-75R
TrumpfMTUT-25RMTUT-38RMTUT-50RMTUT-75R
PUDTS for Radius U-Bends
radius u bend die pads

PBNTs for Bull-Nose Bending

These Pads are designed for 2 hit-180 degree BULL NOSE BENDING.

  • During the first hit, a 100 degree arc is formed. Feeding the sheet metal in, and setting the back gauge so that there is a 10 degree overlap between the 2 bends, a perfect 180 degree bend is formed.
  • The molded back stop enables bending very close to the edge of the sheet metal.
  • The designated Radii in the pad are to be the outside radii on the part, allowing for spring back. The punch radius must be at least one metal thickness smaller than the pad radius.
OUTSIDE RADIUSAMERICAN STYLEAMADA STYLETRUMPF STYLE
3/4” (19mm)MTBNA-75RMTBNE-75RMTBNT-75A
1” (25.4mm)MTBNA-1RMTBNE-1RMTBNT-1A
die pads for bull-nose bending
Quick Contact
Have a Question?

You have questions, we have answers. Contact us today. Our skilled customer service specialists can help you make the right choice in polyurethane applications.