|
For American and European Style Press Brakes
Made of a very hard, tooling grade Urethane for SCRATCH-FREE bending of
sheet metal.
Just drop it on a Quick Change Die Rail and changing sizes of V-Dies will be a snap.
Turn it around for a different size V-opening or drop in a new die.
No need for alignment or shimming.
Save Time and Money in forming pre-finished sheet metal as compared to using plastic film die covers.
For European Style Machines, the 2-V Die can be used with a quick change rail, mounted on a 2-V Die holder.
For American Style Machines, the 2-V Die can be used with a special rail (UST Part Number PQCR2).
The 2V Dies are designed for Air bending only. The heights are the same as comparable Steel V Dies.
Urethane 2-V Dies are available in 6 different
combinations of V-Openings.
| Part Number |
V-Openings
V1 / V2 |
Angle of V
Degrees |
Width
( W ) |
Radii
R1 / R2 |
Height
( H ) |
| Inch |
mm |
Inch |
mm |
mm |
Inch |
mm |
| 7101U |
.236/.394 |
6/10 |
90 |
1.968 |
50 |
0.4 / 0.6 |
1.811 |
46 |
| 7102U |
.315/.472 |
8/12 |
90 |
1.968 |
50 |
0.5 / 0.8 |
1.811 |
45 |
| 7104U |
.551/.709 |
14/18 |
88 |
2.362 |
60 |
0.5 / 0.5 |
1.811 |
45 |
| 7105U |
.472/.787 |
12/20 |
88 |
2.362 |
60 |
0.5 / 0.5 |
1.811 |
45 |
| 7106U |
.630/.984 |
20/25 |
88 |
2.362 |
60 |
0.8 / 0.8 |
1.811 |
45 |
| 7321U |
.315/.473 |
8/12 |
30 |
2.362 |
60 |
1.0 / 1.0 |
1.969 |
45 |
|
