About us  |  About Polyurethanes  |  Engineering Info  |  Successful Applications  |  Contact 

Hemming Die Pad is used for 2 hit single set-up hemming die.


For Hemming in two strokes on 18 Ga. and lighter M.S. using a steel Hemming Punch.
With the first hit, a 30° angle bend is made. The part is then pulled up and tilted and the slanted side of the punch flattens the hem.


TOP 
 

 
   
 
 
 
 
 
 
 
 
 
 
 
 
© Copyright 2006 All rights are reserved polyprod.com