| |
Missile Carrier
This custom designed tooling package was made complete with
steel bottom dies and Die-Thane top punches. Corner radii were
formed on the ribbed sections by using a shaped steel punch
and a Die-Thane bottom die.
Tooling Cost was 1/4 of Steel Tooling. |
|
 |
Bulging
Dies
Stainless Steel Pan covers, Bulge
formed, by using Die-Thane as the bulge die. Custom molded
shapes with Die-Thane increased the life expectancy to 175,000
cycles as compared to 5000 cycles from our competitor's Urethane. |
Radius Forming
Dies
Properly
designed Die-Thane Radius bending tooling offer the most advantages
for all kinds of Radius bending applications. With more radius
bending tooling than anyone else in the world, we have supplied
thousands of radius bending dies |
|
 |
MAR-FREE
Bending
These 48" Dia. colum covers in pre-painted aluminum were
formed with our "SMART-PAD" system, by bump-forming. |
Embossing
Die
This stainless
steel Heat Exchanger Plate formed with a steel bottom and a
Die-Thane sheet used as a forming pad. Press Tonnage=6000 Tons
Tooling Cost: 1/10 of Conventional
Tooling. |
|
 |
Airplane
Wing Sections
Four different shapes of wing sections
were formed with a sectioned, inserted steel bottom die. Die-Thane
Punch, was able to form flanges on all sides, as well as draw
the cup shades and blank the holes. |
|
Die-Thane Tooling 
