|
Forming Pads are used for MAR-FREE bending of pre-painted, pre-polished, and coated sheet metal. Color Coded Pads are available in the following duro-meters and deflecions:
RETAINERS are made of steel
95A |
Amber |
15% deflection |
Stainless steel |
90A |
Red |
25% deflection |
Mild steel |
80A |
Green |
35% deflection |
Aluminum |
70A |
Blue |
40% deflection |
Alum. & thin M.S. |
60A |
Yellow |
45% deflection |
CU & Alum |
Available in 835mm & 415mm
Add sufffix L for 835mm length
Add suffix S for 415mm length
Standard sizes of Metric size URETHANE PADS & RETAINERS:
| P.P.C. Part Nos. |
PAD |
Hole Size |
RETAINER
Part Number |
| Width |
Height |
| B2525PAD | 25mm | 25mm | - | SH2525A,E,T |
| B2525HPAD | 25mm | 25mm | 10mm dia. hole | SH2525A,E,T |
| B5050PAD | 50mm | 50mm | - | SH5050A,E,T |
| B5050HPAD | 50mm | 50mm | 25mm dia hole | SH5050A,E,T |
| B7550PAD | 75mm | 50mm | - | SH7550A,E,T |
| B7550HPAD | 75mm | 50mm | 45mm x 10 R.oval | SH7550A,E,T |
| B10050PAD | 100mm | 50mm | - | SH10050A,E,T |
| B10050HPAD | 100mm | 50mm | 60mm x 10 R.oval | SH10050A,E,T |
| B3025PAD | 30mm | 25mm | - | SH3025A,E,T |
| B8030PAD | 80mm | 30mm | - | SH8030A,E,T |
| B11045PAD | 110mm | 45mm | - | SH11045A,E,T |
Note: To the above pad Part numbers Add suffixes:
DT-15 for 95A Amber
DT-25 for 90A Red
DT-35 for 80A Green
DT-40 for 70A Blue
DT-45 for 60A Yellow
Suffixes in Retainers Part numbers: A for American; E for EUROPEAN & AMADA, T for TRUMPF
|
